# 180-Degree Shutter Rule

> Why video shutter speed is set to double the frame rate, so 1/50 at 24 frames. And how an ND filter keeps it there in bright sun.

**Course:** [Cinematography and Lighting](https://learn.benibix.com/learn/design-cinematography)  
**Time:** 10 min

**After this lesson you can:**

- Set the shutter speed from the frame rate
- Explain the motion blur the rule gives
- Use an ND filter to cut light in bright sun

## Why video shutter speed is double the frame rate

The 180-degree shutter rule sets the shutter speed to about double the frame rate. At 24 frames a second, the shutter is 1/48 of a second, which cameras round to 1/50. At 30 frames it is 1/60. The shutter is then open for half of each frame's time, which gives the soft motion blur people know from films.

In video, each frame is a short photo. If the shutter is open for half the frame's time, a moving hand leaves a small streak. When the frames play back, those streaks blend, and the motion looks smooth.

Break the rule and the motion changes. A very fast shutter, like 1/1000, freezes each frame sharp. Played back, movement looks jerky. That look is sometimes used on purpose, in battle scenes. A slow shutter smears everything, which looks dreamy or drunk.

The name comes from old film cameras. Inside was a spinning disc with a half-circle opening, 180 degrees of the full circle. Light reached the film only through the open half.

The rule causes a problem in bright sun. With the shutter stuck at 1/50 and the aperture wide for a soft background, too much light gets in. The picture turns white, and you cannot speed up the shutter without breaking the rule.

A neutral density filter, or ND filter, fixes it. It is dark glass in front of the lens that cuts the light without changing its colors. A 0.3 filter cuts one stop, a 0.6 cuts two stops and a 0.9 cuts three. Some cameras have one built in.

The common mistake is using a fast shutter to fix a bright scene. The picture looks right in a still frame, and then it stutters when it plays. Keep the shutter on the rule and darken the lens with an ND filter instead.

![A circle cut in half, one half open and one half solid, marked 180 degrees. Beside it, a strip of time for one frame at 24 frames a second, one twenty-fourth of a second long. The shutter is open for the first half of the strip, one forty-eighth of a second, and closed for the rest.](https://learn.benibix.com/diagrams/des2-shutter-180.svg)

### Example: A beach shoot at noon

A crew films at the beach at noon, at 24 frames, shutter 1/50, f/2.8 and ISO 100. The picture is three stops too bright.

Instead of a 1/400 shutter, they add a 0.9 ND filter. That cuts three stops, the exposure is right, and the waves still move smoothly.

**Words in this lesson:** [180-Degree Shutter Rule](https://learn.benibix.com/term/design/180-degree-shutter-rule), [Neutral Density Filter (ND Filter)](https://learn.benibix.com/term/design/nd-filter)

**Question:** What shutter speed does the 180-degree rule give at 24 frames a second?

**Answer:** About 1/50 of a second. The rule doubles the frame rate: 24 becomes 1/48, which cameras round to 1/50. The shutter is open for half of each frame.

---

Source: https://learn.benibix.com/learn/design-cinematography/180-degree-shutter-rule
Author: Behnia Zarei (a developer in Vienna, Austria, who builds and teaches data, AI and business intelligence at BENIBIX)
Publisher: BENIBIX Learn (https://learn.benibix.com/)
Last updated: 2026-11-20
Licence: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Quote freely with attribution.
