# Exposure Triangle Basics

> Aperture, shutter speed and ISO set how bright a picture is. What a stop means, and the side effect each setting brings with it.

**Course:** [Cinematography and Lighting](https://learn.benibix.com/learn/design-cinematography)  
**Time:** 12 min

**After this lesson you can:**

- Name the three settings that control exposure
- Trade one setting against another by stops
- Say the side effect of each setting

## How aperture, shutter speed and ISO set the brightness

Exposure is how much light makes up each picture. Three settings control it: the aperture, the shutter speed and the ISO. Together they are called the exposure triangle. Each one is counted in stops, and one stop means twice or half the light. Change one setting by a stop, and you must change another to keep the same brightness.

The aperture is the hole in the lens that lets light in. Its size is an f-number, like f/2.8 or f/8. A smaller number is a wider hole and more light. Going from f/2.8 to f/4 is one stop, which halves the light. A wide hole also blurs the background more.

Shutter speed is how long each picture takes in light. It is written as part of a second, like 1/50 or 1/1000. Halving the time, from 1/50 to 1/100, is one stop less light. A fast shutter freezes motion. A slow one lets moving things blur.

ISO sets how strongly the camera boosts the light it gets. Doubling it, from 100 to 200, makes the picture twice as bright, which is one stop. A high ISO helps in the dark but adds grain, called noise. Many cameras have one base ISO where the picture is cleanest.

So every setting has a side effect. Aperture changes the blur behind the subject. Shutter speed changes the blur of motion. ISO changes the grain. Choosing exposure is really choosing which side effects you want.

Too little light makes a dark, muddy picture. Too much turns the bright parts pure white, and that detail is gone for good. Most filmmakers set the exposure for the face first, then let the rest fall where it falls.

The common mistake is leaving all three on auto. The camera keeps the brightness steady by changing them as the shot runs. The picture pulses brighter and darker, and the background blur changes in the middle of a line.

![A triangle with a setting at each corner. Aperture at the top, with a note that a wider hole blurs the background. Shutter speed at the bottom left, with a note that a slower shutter blurs motion. ISO at the bottom right, with a note that a higher ISO adds grain. Exposure sits in the middle.](https://learn.benibix.com/diagrams/des2-exposure-triangle.svg)

### Example: An evening interview loses a stop

A crew films an interview at f/2.8, 1/50 and ISO 400. As the sun sets, the picture gets one stop darker.

They could open to f/2, but the background is already soft enough. They keep the shutter at 1/50 for natural motion. So they raise the ISO to 800, and the picture is bright again.

**Words in this lesson:** [Exposure](https://learn.benibix.com/term/design/exposure), [Exposure Triangle](https://learn.benibix.com/term/design/exposure-triangle), [Aperture](https://learn.benibix.com/term/design/aperture), [Shutter Speed](https://learn.benibix.com/term/design/shutter-speed), [ISO (Camera)](https://learn.benibix.com/term/design/iso)

**Question:** What happens when you go from f/2.8 to f/4?

**Answer:** Half as much light comes in, and more of the scene is sharp. A bigger f-number is a smaller hole. f/2.8 to f/4 is one stop, so half the light, and the narrower hole keeps more of the scene in focus.

---

Source: https://learn.benibix.com/learn/design-cinematography/exposure-triangle
Author: Behnia Zarei (a developer in Vienna, Austria, who builds and teaches data, AI and business intelligence at BENIBIX)
Publisher: BENIBIX Learn (https://learn.benibix.com/)
Last updated: 2026-11-20
Licence: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Quote freely with attribution.
