# HDD vs SSD vs NVMe

> How a hard drive, a SATA SSD and an NVMe SSD store data and how fast each one is. Which link each one uses, and which to pick for what.

**Course:** [Computer Hardware](https://learn.benibix.com/learn/infrastructure-hardware)  
**Time:** 12 min

**After this lesson you can:**

- Say how a hard drive and an SSD differ
- Tell SATA from NVMe
- Pick the right drive for a job

## How the three kinds of drive differ

A drive keeps your files when the power is off. There are three common kinds. A hard drive reads about 200 megabytes a second. An SSD on the older SATA link reads about 550. An NVMe SSD on PCIe can read 7,000 or more. The gap comes from how each one stores data and how it joins the board.

A hard drive, or HDD, stores data on round discs that spin. Common ones spin 5,400 or 7,200 times a minute. A tiny arm moves over the discs to read and write. The arm has to swing to each piece of data, and that swing is what makes it slow.

A solid-state drive, or SSD, keeps data on memory chips called flash. Nothing in it moves, so it reaches any piece of data almost at once. A computer with an SSD starts and opens apps in seconds. Each cell in the chips can only be written so many times. A normal user rarely gets close.

SATA is the link and cable most hard drives use. Its top speed is 6 gigabits a second, which is about 600 megabytes. That is plenty for a hard drive. An SSD on SATA is held back by it, the way a fast car is held back by a narrow road.

NVMe is the way an SSD talks to the computer over PCIe lanes instead. It usually takes 4 lanes. It also lets the drive handle many requests at once, which suits flash. Many NVMe drives are small sticks, called M.2, that plug straight into the board.

Price runs the other way. A hard drive costs the least for each terabyte, so it still holds large backups and video stores. SSDs cost more for each terabyte but are now cheap enough for almost every laptop.

People often think an SSD will last forever because nothing moves. It wears out in a different way, and it can fail with no warning. A hard drive often gets noisy first. Either way, a drive is not a backup. Keep a second copy of anything you cannot lose.

## The three drives side by side

| Drive | Stores data on | Link | Reads about |
| --- | --- | --- | --- |
| Hard drive (HDD) | Spinning discs and an arm | SATA | 200 megabytes a second |
| SATA SSD | Flash chips | SATA | 550 megabytes a second |
| NVMe SSD | Flash chips | PCIe, 4 lanes | 7,000 megabytes a second |

## Which drive to pick

1. **Pick a hard drive.** When you need many terabytes for backups or old video. Speed does not matter here.
2. **Pick a SATA SSD.** When an older computer has no M.2 slot and you want it to start in seconds.
3. **Pick an NVMe SSD.** For the main drive of any new laptop, desktop or server that has a slot for one.

![Three drives in a row. A hard disk with a spinning disc and an arm, joined by a thin SATA link. A SATA SSD of flash chips on the same thin link. An NVMe SSD of flash chips on a wide link of four PCIe lanes.](https://learn.benibix.com/diagrams/inf4-storage-drives.svg)

### Example: Lucy speeds up an old desktop

Lucy's desktop has a hard drive and takes 90 seconds to start. Its board has no M.2 slot, but it has a free SATA plug.

She copies the system onto a SATA SSD. It now starts in 15 seconds, and the old hard drive stays inside to hold her 2 terabytes of photos.

**Words in this lesson:** [Hard Disk Drive (HDD)](https://learn.benibix.com/term/infrastructure/hard-disk-drive), [Solid-State Drive (SSD)](https://learn.benibix.com/term/infrastructure/solid-state-drive), [Serial ATA (SATA)](https://learn.benibix.com/term/infrastructure/serial-ata), [Non-Volatile Memory Express (NVMe)](https://learn.benibix.com/term/infrastructure/nvme)

> **The one difference.** A hard drive is slow because an arm must move. An SSD on SATA is held back by an old link, and an NVMe SSD on PCIe is not.

**Question:** Why is an NVMe SSD faster than a SATA SSD?

**Answer:** It uses PCIe lanes instead of the slower SATA link. Both store data on flash chips. The SATA link tops out at about 600 megabytes a second, while NVMe runs over PCIe lanes that carry many times more.

---

Source: https://learn.benibix.com/learn/infrastructure-hardware/hdd-vs-ssd-vs-nvme
Author: Behnia Zarei (a developer in Vienna, Austria, who builds and teaches data, AI and business intelligence at BENIBIX)
Publisher: BENIBIX Learn (https://learn.benibix.com/)
Last updated: 2026-11-19
Licence: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Quote freely with attribution.
