# Server Racks and Rack Units

> Why racks are 19 inches wide and counted in units of 1.75 inches. How to read 1U, 2U and 42U, and plan what fits in one rack.

**Course:** [Servers and Racks](https://learn.benibix.com/learn/infrastructure-servers)  
**Time:** 10 min

**After this lesson you can:**

- Read a height written as 1U, 2U or 42U
- Plan what fits in one rack
- Say why a rack keeps air moving one way

## How rack sizes are counted

A server rack is a tall metal frame that holds servers and network gear in a stack. The usual rack is 19 inches wide inside, so gear from any maker fits. Its height is counted in rack units. One unit, written 1U, is 1.75 inches, or 44.45 millimetres. A full rack is often 42U high.

The units make planning a sum. A 1U server takes one slot, a 2U server takes two and a 4U server takes four. So a 42U rack can hold 42 servers at 1U each, or 21 at 2U. In practice some units go to network gear, power strips and spare room.

The width is fixed, but the depth is not. Most racks are 60 to 120 centimetres deep, and long servers need a deep rack. Measure the gear before you buy the frame.

Air moves one way through a rack. Cool air goes in at the front of every server, and hot air comes out of the back. In a big hall, racks stand in rows, all facing the same way. That makes cold aisles at the front and hot aisles at the back.

Heavy gear goes at the bottom. A battery box for power can weigh as much as an adult, and a rack loaded from the top can tip over. Light network gear often sits at the top, near the cables that come in from above.

The space a rack takes is also how it is priced. A data center may rent out a whole rack, half a rack, or a few units in a shared one. Power is counted too, because a rack full of servers can draw as much as several homes.

A common mistake is to fill every unit. Servers packed with no gap can block cables and trap heat, and there is no room for the next one. Leave a few units free, and fill empty slots with blank panels so hot air cannot loop back to the front.

![A tall server rack with a ruler down its side counting units from 1 at the bottom to 42 at the top. A 1U server and a 2U server sit near the top, a network switch above them, and a heavy UPS battery box sits at the bottom. Beside the rack, a data center hall holds rows of racks, and one rack behind a locked cage is marked colocation.](https://learn.benibix.com/diagrams/inf3-rack.svg)

### Example: Jack plans a half rack

Jack rents a half rack of 21U. He needs a 1U network switch, four 2U servers and a 2U battery box.

That is 1 plus 8 plus 2, or 11U. He leaves the other 10U free, so the next two servers will fit without moving anything.

**Words in this lesson:** [Server Rack](https://learn.benibix.com/term/infrastructure/server-rack), [Rack Unit (U)](https://learn.benibix.com/term/infrastructure/rack-unit)

**Question:** How many 2U servers fit in a 42U rack with nothing else in it?

**Answer:** 21. Each 2U server takes two units, and 42 divided by 2 is 21. A real rack also holds a switch and power gear, so the true number is a little lower.

---

Source: https://learn.benibix.com/learn/infrastructure-servers/server-racks-and-rack-units
Author: Behnia Zarei (a developer in Vienna, Austria, who builds and teaches data, AI and business intelligence at BENIBIX)
Publisher: BENIBIX Learn (https://learn.benibix.com/)
Last updated: 2026-11-19
Licence: CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Quote freely with attribution.
