Bleed vs Safe Area
Bleed is extra design past the cut, made to be cut off. The safe area is inside the cut, where text stays safe.
Bleed
Extra design that runs past the page edge. It is cut off, so no white line shows.
Bleed is the extra strip of design that runs past the edge of a printed page. Printers print on bigger sheets and then cut them down, and the cut can be off by a tiny amount. If the background stops right at the edge, a thin white line may show. So colors and pictures that touch the edge are stretched past it, usually by 3 mm or 0.125 inch. Everything in the bleed is cut away.
Safe Area
The space inside the cut line where text and logos are safe. Nothing key goes outside it.
The safe area is the space inside the trim line where important things can sit without risk of being cut. Text, logos and faces stay inside it. It is usually a few millimeters in from the trim, often 3 to 5 mm on small pieces. Since the cut can shift a little, anything outside it may be trimmed. Screens have the same idea, where phone notches and app buttons cover the edges.
In one line
- Bleed
- Extra design that runs past the page edge. It is cut off, so no white line shows.
- Safe Area
- The space inside the cut line where text and logos are safe. Nothing key goes outside it.