Skip to content
BENIBIX Learn

Trim Size

Design📣 Marketing DesignPrint Production

Also known as Trim, Trim Line, Finished Size

The final size of a printed piece after it is cut. The trim line is where the blade goes.

Think of it like

It is like a cookie. The size that counts is the one left once you cut it out.

Example

Ben's A5 flyer trims to 148 by 210 mm. His file is 154 by 216 mm, with 3 mm of bleed on each side.

Why it matters

Get the trim size wrong and the piece will not fit the frame, envelope or stand it was made for.

Definition

Trim size is the final size of a printed piece after it is cut. The trim line is where the blade cuts. A business card might have a trim size of 85 by 55 mm, while the file is a little bigger to include the bleed. Designers set the page to the trim size and add the bleed around it. Everything is measured from the trim line.
The solid middle line is the trim, where the paper is cut.

Common mistake

Setting the page size to include the bleed. The printer then cuts it smaller than planned.

Key takeaways

  1. 1
    The cut size. What you hold at the end.
  2. 2
    Bleed goes outside. The file is bigger.
  3. 3
    Measure from here. Bleed out, safe area in.