Skip to content
BENIBIX Learn

Boot Process

Development🖥️ Platforms & OSOperating Systems

Also known as Booting, Boot, Boot Loader, Bootloader, Startup Sequence

The steps a computer takes to start up. It ends at the login screen.

Think of it like

It is like a row of dominoes. Each one tips the next, from the button to the screen.

Example

Jack's laptop shows its maker's logo, then a spinning circle, then the login screen. That is the firmware, then the boot loader and kernel, then the first program at work.

Why it matters

When a computer will not start, the step where it stops tells you what broke. A logo with no circle points at the disk, not at Windows.

Definition

The boot process is what a computer does between the power button and the login screen. A small program stored on a chip, the firmware, runs first and checks the parts. It hands over to a boot loader on the disk. The boot loader loads the kernel into memory. The kernel starts the drivers and then the first program, which starts all the rest.
Each step hands over to the next one. If a step fails, nothing after it runs.

Common mistake

Thinking the system starts itself. Two smaller programs run first. If either one fails, the system cannot load.

Key takeaways

  1. 1
    Firmware first. A program on a chip on the board runs before anything on the disk.
  2. 2
    A chain of handovers. Each step loads the next one and steps aside.
  3. 3
    The kernel takes charge. Once it loads, it starts every other program.

Learn it properly