Skip to content
BENIBIX Learn

Mean Time to Detect (MTTD)

Infrastructure📟 ReliabilityReliability Metrics

Also known as MTTD, Time to Detect, Detection Time

How long it takes to spot a break. It is the mean of many.

Think of it like

Think of it like a dripping tap. How long until someone sees the puddle?

Example

Lucy's checkout broke at 09:00, and the first alert fired at 09:25. Across the year, her team's mean time to detect is 18 minutes.

Why it matters

Fixing cannot start until someone knows. Each minute here adds to the outage.

Definition

Mean time to detect is the average time between a problem starting and someone noticing it. The clock starts when users are first hurt. It stops when an alert fires or a person spots the fault. Good monitoring makes this time short. A long time to detect means users find the problem first.
The first short span after the failure is time to detect. It ends when an alert fires.

Common mistake

Starting the clock at the alert. The fault began earlier, so measure from when users were first hurt.

Key takeaways

  1. 1
    Start to notice. From the break to the alert.
  2. 2
    Set by monitoring. Good checks make it short.
  3. 3
    Part of the outage. It adds to recovery time.