Skip to content
BENIBIX Learn

Open Systems Interconnection (OSI) Model

Infrastructure🌐 NetworkingNetwork Basics

Also known as OSI Model, Open Systems Interconnection Model, OSI Reference Model, Seven-Layer Model, OSI Layers

A map that splits network work into seven layers. It runs from the cable to the app.

Think of it like

It is like the floors of a building. Each floor does one job and hands its work to the floor above or below.

Example

A support guide says the fault is at layer 3. That means the cable is fine, but packets are not reaching the right address.

Why it matters

It gives people a shared map for finding faults. You can test one layer at a time, from the bottom up.

Definition

The OSI model splits the work of a network into seven layers. Layer 1 at the bottom is the cable or radio signal. Layer 3 moves packets between networks by IP address. Layer 4 is where TCP and UDP work. Layer 7 at the top is the app, such as HTTP. Each layer only talks to the ones just above and below it.
Seven layers, with a real example on each. Data goes down the stack to leave and up the stack to arrive.

Common mistake

Thinking real networks are built as seven separate parts. The model is a map for thinking. Real protocols often cover more than one layer.

Key takeaways

  1. 1
    Seven layers. From the signal up to the app.
  2. 2
    One job each. Each layer passes work to its neighbours.
  3. 3
    A map. Used to name where a fault is.

Learn it properly