White Balance and Kelvin
Level 4 · Light
Light has a color, measured in kelvin: warm 3200K bulbs and cool 5600K daylight. How white balance fixes it, and why golden hour glows.
Course contentsLesson 12 of 14
Level 1 · What the camera shows
Level 2 · Moves and lenses
Level 3 · Exposure
Level 5 · Covering a scene
After this lesson you can
- Read a color temperature in kelvin
- Set white balance for the main light
- Plan a shoot around golden hour
10 mincovers 3 glossary entries
Worth reading first: Hard and Soft Light
Why light has a color, and how the camera corrects it
Light has a color, called its color temperature, and it is measured in kelvin, written K. Low numbers are warm and orange, high numbers are cool and blue. Film lights are often 3200K, called tungsten, or 5600K, called daylight. White balance tells the camera which one it is under, so white looks white.
Your eyes fix the color for you without asking. A white shirt looks white under a lamp and under the sky. A camera does not do this as well. Set it wrong and the whole picture turns orange or blue.
To set white balance, match it to the main light. Indoors under warm bulbs, set about 3200K. Outdoors in daylight, set about 5600K. Or point the camera at a white card in the main light and let it set itself.
Auto white balance guesses each shot again. When the camera turns from a window to a lamp, the guess shifts in the middle of a shot. In an edit, two shots of the same face can then be two colors. Setting it by hand keeps them alike.
Mixing lights of two colors in one shot gives a face two colors, one side orange and one blue. Either change the bulbs to match, or put a colored gel on one light. Sometimes the mix is used on purpose, for a cold night outside a warm house.
Golden hour is the time just after sunrise and just before sunset. The sun is low, so its light is soft, warm and comes from the side. Faces glow and shadows are long. It is short, and its length changes with the season and how far from the equator you are.
The common mistake is fixing every color in the edit. A shot recorded far too orange loses detail when it is corrected. Set white balance on the day, and the edit only has to make small changes.
Worked example
A living room at dusk
A crew films in a living room lit by warm 3200K lamps. The window shows blue evening sky. With the camera at 3200K, the lamps look normal and the window glows deep blue.
They like the look, so they keep it. Then they gel their one film light to 3200K, so the actor's face matches the lamps.
The words for this lesson3
Check yourself
What color temperature is daylight film lighting?
Finished this lesson?
Marking it complete also marks its 3 glossary entries learned, which updates your roadmap and your saved page. 0 are already marked.