Hue, Saturation and Lightness
Level 1 · How color works
The three dials that describe any color: hue, saturation and lightness. How HSL and OKLCH write a color so a person can change it by hand.
Course contentsLesson 2 of 13
Level 1 · How color works
Level 2 · Color on screens and paper
Level 3 · How a digital picture is made
Level 4 · Pictures that carry a message
After this lesson you can
- Describe a color with three dials
- Make a tint and a shade
- Read an HSL color
10 mincovers 5 glossary entries
Worth reading first: Color Theory Basics
The three dials behind every color
Every color can be described with three dials: hue, saturation and lightness. Hue is the color itself, set as an angle on the wheel from 0 to 360 degrees. Red sits at 0, green at 120 and blue at 240. Saturation and lightness each run from 0 to 100 percent.
Hue is what most people mean by color. Red, orange and blue are hues. Moving the hue dial walks you round the wheel, and at 360 degrees you are back at red. Two colors with the same hue are the same family, however light or dull they are.
Saturation is how strong a color is. At 100 percent it is as bold as it can be. At 0 percent all the color is gone and only a gray is left. Turning saturation down is the quickest way to make a loud color calm.
Lightness is how light or dark a color is. At 50 percent you get the pure color. Push it toward 100 and you add white, which makes a tint, like pink from red. Push it toward 0 and you add black, which makes a shade, like maroon.
HSL is a way to write a screen color as those three dials. A strong blue might be written hsl(220, 90%, 50%). To get a lighter blue for a hover state, raise only the last number. That is much easier than working out a new six-digit code by hand.
HSL has one flaw. Two colors with the same lightness number can look very different in brightness. Yellow at 50 percent looks far brighter than blue at 50 percent. OKLCH is a newer way to write color, published in 2020, that fixes this. Its lightness number matches what the eye sees.
A common mistake is to make a color darker by adding black only. The result often looks muddy. Lowering lightness and nudging the hue a little at the same time gives a richer dark. Painters have done this for centuries, and the dials make it easy on a screen.
/* one hue, three lightness steps */
--blue-light: hsl(220, 90%, 80%);
--blue: hsl(220, 90%, 50%);
--blue-dark: hsl(220, 90%, 30%);Worked example
The words for this lesson5
Check yourself
What happens to a color when its saturation is set to 0 percent?
Finished this lesson?
Marking it complete also marks its 5 glossary entries learned, which updates your roadmap and your saved page. 0 are already marked.