Skip to content
BENIBIX Learn

File Systems: NTFS, APFS, ext4

Level 4 · Files, folders and apps

What a file system writes down about every file, and why each system has its own. Then why a 5 GB video will not copy to an old flash drive.

Course contentsLesson 8 of 10

After this lesson you can

  • Say what a file system keeps for each file
  • Match NTFS, APFS and ext4 to their systems
  • Explain the FAT32 limit of 4 GB per file

12 mincovers 3 glossary entries

Worth reading first: Operating Systems and Kernels

What a file system keeps track of

A file system is the way a disk stores files. It keeps a list of every file: its name, its size, its dates, who owns it and which parts of the disk hold it. Each system has its own. Windows uses NTFS, macOS uses APFS and most Linux systems use ext4.

The drive itself knows nothing about files, whether it is a hard disk or an SSD. It is a long row of numbered blocks, often 4 KB each. A file of 10 KB fills three blocks, and they do not have to sit side by side. The list says which blocks belong to which file, and in what order.

Deleting a file usually removes only its line from the list. The blocks are marked free, but the old bytes stay until a new file is written over them. On a hard disk, an undelete tool can often bring the file back. An SSD tends to clear freed blocks soon after, so the chance is much lower.

The file systems differ in what they allow. NTFS and APFS ignore the case of letters by default, so Notes.txt and notes.txt are the same file. On ext4 they are two different files. A project that works on a Mac can break on a Linux server because one name was typed with a capital letter.

Old formats still turn up on flash drives and memory cards. FAT32 works on nearly every device, but it cannot hold a file bigger than 4 GB. exFAT lifts that limit and still works on Windows, Macs and Linux. Formatting a drive picks its file system, and it wipes the whole drive.

Systems read each other's formats only in part. A Mac can read an NTFS drive but cannot write to it without extra software. Windows cannot open APFS or ext4 drives without extra tools. When one drive has to move between all three, exFAT is the usual choice, because every one of them can read and write it.

People often think a file's name is the file. The name is one line in the list, and the bytes sit somewhere else on the disk. Renaming a file changes only that line, which is why renaming a 20 GB video is instant. Copying it moves every block, which is why that takes minutes.

The file systems you will meet

File systemUsed byLetter case in namesRead and written by
NTFSWindowsIgnored by defaultWindows. A Mac can only read it
APFSmacOS, iOSIgnored by defaultApple devices
ext4Most Linux systemsMatters, so A and a differLinux
FAT32Old flash drivesIgnoredNearly everything, 4 GB per file at most
exFATBig flash drives, cardsIgnoredWindows, macOS and Linux
The list is what you see as files. The blocks are where the bytes really are.

Worked example

Lucy's video will not copy

Lucy tries to copy a 5 GB video onto a flash drive she has had for years. The copy fails with a message that the file is too large, though the drive has 30 GB free.

The drive is formatted as FAT32, which holds 4 GB per file at most. She moves her other files off, formats it as exFAT, and the video copies in four minutes.

The words for this lesson3

Check yourself

Why will a 5 GB file not copy to a flash drive with 30 GB free?

Finished this lesson?

Marking it complete also marks its 3 glossary entries learned, which updates your roadmap and your saved page. 0 are already marked.