Skip to content
BENIBIX Learn

Arduino

Development🔌 Embedded & IoTDevelopment Boards

Also known as Arduino Uno, Arduino Board, Arduino Sketch, Arduino IDE

Small boards and free tools that make it easy to build and code your own gadgets.

Think of it like

It is like a box of building bricks for gadgets. You snap on lights and buttons and tell them what to do.

Example

Emma wires an LED to pin 13 of her Arduino Uno. Her sketch turns it on and off once a second, and it blinks.

Why it matters

It is where most people build their first circuit. Huge numbers of guides and parts work with it.

Definition

Arduino is a family of small boards and free tools for building gadgets. Each board has a microcontroller and pins you can wire to lights, buttons and sensors. You write a short program called a sketch in the Arduino IDE, in a simple form of C++. The sketch has a setup part that runs once and a loop part that runs forever. You send it to the board over a USB cable.

Example code

cpp
void setup() {
  pinMode(13, OUTPUT);
}

void loop() {
  digitalWrite(13, HIGH);
  delay(1000);
  digitalWrite(13, LOW);
  delay(1000);
}
The blink sketch: setup runs once, then loop turns the light on and off forever.
On the left, an Arduino board runs one sketch in a loop, again and again.

Common mistake

Wiring an LED straight to a pin with no resistor. Too much current can burn out the LED or the pin.

Key takeaways

  1. 1
    Board plus software. The IDE and the board work as one.
  2. 2
    Setup and loop. Every sketch has both parts.
  3. 3
    Open design. Anyone may copy the boards.

Compare