Skip to content
BENIBIX Learn

Breadboard

Development🔌 Embedded & IoTDevelopment Boards

Also known as Solderless Breadboard, Prototyping Board, Jumper Wire

A board with holes that joins parts and wires. No solder is needed.

Think of it like

It is like a peg board for wires. Push parts in, pull them out, and nothing is glued.

Example

Emma pushes an LED, a resistor and two jumper wires into a breadboard. She links it to her Arduino and tests her blink sketch.

Why it matters

It makes trying an idea quick and free. A mistake costs one pulled wire, not a ruined board.

Definition

A breadboard is a plastic board full of small holes for building circuits without solder. Metal strips under the holes join them in rows. You push in a part and a wire, and they connect. Pull them out, and the circuit is gone. People use it to try a circuit before they build it for good.
The breadboard, below the boards, is where a circuit gets tried out.

Common mistake

Putting both legs of a part in the same row. That row is one strip of metal, so the part is shorted and does nothing.

Key takeaways

  1. 1
    No solder. Parts push in and pull out.
  2. 2
    Joined rows. Holes in a row connect.
  3. 3
    For testing. Try it before you build it.