Skip to content
BENIBIX Learn

Serial ATA (SATA)

Infrastructure🔧 HardwareStorage Drives

Also known as SATA, SATA III, SATA 6Gb/s, SATA Cable

The link and cable most hard drives use. Its top speed is 6 gigabits a second.

Think of it like

Think of it like a road with one lane. It works well, but the cars wait in one line.

Example

Lucy adds a second drive to her desktop. She runs a SATA cable to the board. Then she plugs in a SATA power lead.

Why it matters

SATA sets the speed limit for any drive on it. That is why fast SSDs moved to NVMe.

Definition

Serial ATA is the link, cable and plug that most hard drives use to join a computer. Its newest version carries up to 6 gigabits a second, which is about 600 megabytes. That is plenty for a hard drive. A flash drive can go much faster, so on SATA it is held back. A SATA drive takes a thin data cable plus a separate power cable from the power supply.
The hard disk and the SATA SSD share the same thin link. It tops out near 600 megabytes a second.

Common mistake

Expecting a SATA SSD to match an NVMe one. The SATA link holds it near 600 megabytes a second, however fast its chips are.

Key takeaways

  1. 1
    Made for hard drives. Plenty fast for spinning discs.
  2. 2
    6 Gb/s at most. About 600 megabytes a second.
  3. 3
    Two cables. One for data and one for power.

Compare

Learn it properly