HDD vs SSD vs NVMe
Level 3 · Drives and how fast they are
How a hard drive, a SATA SSD and an NVMe SSD store data and how fast each one is. Which link each one uses, and which to pick for what.
Course contentsLesson 6 of 8
Level 1 · The board and the processor
Level 2 · Graphics cards and AI chips
Level 3 · Drives and how fast they are
Level 4 · Power and start-up
After this lesson you can
- Say how a hard drive and an SSD differ
- Tell SATA from NVMe
- Pick the right drive for a job
12 mincovers 4 glossary entries
Worth reading first: Motherboard and PCIe Slots
How the three kinds of drive differ
A drive keeps your files when the power is off. There are three common kinds. A hard drive reads about 200 megabytes a second. An SSD on the older SATA link reads about 550. An NVMe SSD on PCIe can read 7,000 or more. The gap comes from how each one stores data and how it joins the board.
A hard drive, or HDD, stores data on round discs that spin. Common ones spin 5,400 or 7,200 times a minute. A tiny arm moves over the discs to read and write. The arm has to swing to each piece of data, and that swing is what makes it slow.
A solid-state drive, or SSD, keeps data on memory chips called flash. Nothing in it moves, so it reaches any piece of data almost at once. A computer with an SSD starts and opens apps in seconds. Each cell in the chips can only be written so many times. A normal user rarely gets close.
SATA is the link and cable most hard drives use. Its top speed is 6 gigabits a second, which is about 600 megabytes. That is plenty for a hard drive. An SSD on SATA is held back by it, the way a fast car is held back by a narrow road.
NVMe is the way an SSD talks to the computer over PCIe lanes instead. It usually takes 4 lanes. It also lets the drive handle many requests at once, which suits flash. Many NVMe drives are small sticks, called M.2, that plug straight into the board.
Price runs the other way. A hard drive costs the least for each terabyte, so it still holds large backups and video stores. SSDs cost more for each terabyte but are now cheap enough for almost every laptop.
People often think an SSD will last forever because nothing moves. It wears out in a different way, and it can fail with no warning. A hard drive often gets noisy first. Either way, a drive is not a backup. Keep a second copy of anything you cannot lose.
The three drives side by side
Which drive to pick
- 1
Pick a hard drive
When you need many terabytes for backups or old video. Speed does not matter here.
- 2
- 3
Pick an NVMe SSD
For the main drive of any new laptop, desktop or server that has a slot for one.
Worked example
Lucy speeds up an old desktop
Lucy's desktop has a hard drive and takes 90 seconds to start. Its board has no M.2 slot, but it has a free SATA plug.
She copies the system onto a SATA SSD. It now starts in 15 seconds, and the old hard drive stays inside to hold her 2 terabytes of photos.
The words for this lesson4
Check yourself
Why is an NVMe SSD faster than a SATA SSD?
Finished this lesson?
Marking it complete also marks its 4 glossary entries learned, which updates your roadmap and your saved page. 0 are already marked.