Anatomy of a Letter
Level 1 · Letters and fonts
The lines every letter sits on and the parts that stick up and hang down. Why a tall x-height makes text look bigger at the same size.
Course contentsLesson 2 of 17
Level 1 · Letters and fonts
Level 2 · Kinds of type
Level 3 · Setting text
Level 4 · Choosing and shipping fonts
After this lesson you can
- Name the guide lines letters sit on
- Point to an ascender and a descender
- Explain why x-height matters
10 mincovers 6 glossary entries
Worth reading first: Typefaces and Fonts
The lines and parts of a letter
Every letter in a font sits on a set of guide lines. The baseline is the line letters stand on. The x-height is how tall the small letters are, measured by the letter x. The cap height is how tall the capitals are, measured by the top of a capital H.
Some small letters reach higher than the x-height. The part of h, d, b and k that sticks up is called the ascender. In many fonts it rises a little above the cap height, so a lowercase d can stand taller than a capital D.
Other letters drop below the baseline. The tail of g, p, q, y and j is called the descender. Lines of text need room for these parts, or the tail of a g on one line will touch the top of an h on the line below.
The counter is the empty space inside a letter. It is the hole in o, the bowl in d and the small gap in e. Open counters stay clear when text is small or blurry. Tight ones fill in, and an e can start to look like a c.
The x-height matters most. Two fonts set at the same size can look quite different, because one has small letters that fill 50 percent of the height and the other 40. The one with the taller x-height looks bigger and is easier to read on a screen.
That is why a size number alone tells you little. Switch from one typeface to another at 16 pixels, and the text may suddenly look one size larger or smaller. Judge by eye, by comparing the small letters, and change the size until they match.
People often think the size of a font is the height of its capitals. It is not. The size covers the whole space a letter could fill, from the top of the tallest ascender to the bottom of the lowest descender, plus a little room.
Worked example
Two fonts at the same size
Omar's app used one font at 14 pixels, and users said the text was hard to read. He tried a second font at the same 14 pixels.
The second font had a much taller x-height, so the small letters were bigger. Nothing else changed, and the complaints dropped.
The words for this lesson6
Check yourself
Why can two fonts at the same size look different in size?
Finished this lesson?
Marking it complete also marks its 6 glossary entries learned, which updates your roadmap and your saved page. 0 are already marked.