Legibility and Readability
Level 4 · Choosing and shipping fonts
Legibility is about the font. Readability is about how it is set. How to pair two fonts so they work well on one page.
Course contentsLesson 14 of 17
Level 1 · Letters and fonts
Level 2 · Kinds of type
Level 3 · Setting text
Level 4 · Choosing and shipping fonts
After this lesson you can
- Tell legibility from readability
- Test a font for confusable letters
- Pair two fonts that work together
11 mincovers 3 glossary entries
Worth reading first: Variable Fonts and OpenType
What is the difference between legibility and readability?
Legibility is how easy it is to tell one letter from the next. The font decides it. Readability is how easy a whole block of text is to read. The setting decides it: size, spacing, line length and contrast. A legible font set badly can still be hard to read.
The quick test for legibility is to type Il1 and 0O. In many plain fonts, a capital I, a small l and the number 1 look almost the same. That matters for passwords, codes and signs. Fonts made for screens and signs give each one a clear shape.
Other things that help legibility are a tall x-height, open counters and letters that are not too narrow. These are choices made by the person who drew the font. You cannot fix a font with closed, tight letters by changing the settings.
Readability is the part you control. A good font set at 11 pixels, in pale gray, with long lines and tight leading, is hard work. The same font at 16 pixels, dark gray, 66 characters a line and 1.5 leading reads easily for hours.
Font pairing is picking two or three fonts that work on one page. The usual pair is one for headings and one for body text. They should differ enough to look on purpose, such as a serif with a sans, and share something, like a similar x-height.
Two fonts that are almost alike make a bad pair. The difference looks like a mistake. Two loud fonts make a bad pair too, because they fight. One font with a big family is often enough: headings in bold, body in regular, with no pairing at all.
People use the two words as if they meant the same thing. They do not, and the fix is different. If readers misread letters, change the font. If they tire after a few paragraphs, change the setting. Most hard-to-read pages are a setting problem.
Which one to fix
- 1
Fix the font when readers mix up letters like l, I and 1, or misread codes.
- 2
Fix the size, spacing and line length when readers tire or skip lines.
Worked example
Wi-Fi codes nobody could type
A hotel printed Wi-Fi codes like Il1lO0 on its key cards. Guests kept typing them wrong and calling the front desk.
The hotel switched the cards to a font with a tail on the l and a slash in the 0. Calls about Wi-Fi fell by more than half.
The words for this lesson3
Check yourself
Readers say your article is tiring after a few paragraphs. What should you change first?
Finished this lesson?
Marking it complete also marks its 3 glossary entries learned, which updates your roadmap and your saved page. 0 are already marked.