Rack vs Blade vs Tower
Level 2 · Shapes and racks
The three shapes a server comes in: a tower that stands alone, a flat rack server and a thin blade. Which one fits an office or a hall.
Course contentsLesson 3 of 8
Level 1 · What a server is
Level 2 · Shapes and racks
Level 3 · Parts that keep it running
Level 4 · Remote control and where servers live
After this lesson you can
- Tell the three server shapes apart
- Say where each shape fits best
- Explain what a blade shares with its chassis
11 mincovers 3 glossary entries
Worth reading first: Servers and Clients
How the three server shapes differ
Servers come in three shapes. A tower server stands on its own, like a big desktop. A rack server is flat, often 4.5 centimetres high, and slides into a metal frame. A blade server is thinner still and slots into a shared box. Each shape packs more servers into the same space than the one before.
A tower server is a server in an upright case. It needs no rack, so it can sit under a desk or in a cupboard. It is quiet and easy to open. It suits a small office with one or two servers, but it takes up far more floor for each server.
A rack server is the most common shape in large buildings of servers. Most are one or two units high, which is 4.5 or 9 centimetres. It screws onto rails, so it can slide out like a drawer for repairs. Dozens stack in one frame and share its power and network cables.
A blade server is a thin server that slots into a shared box called a chassis. Each blade has its own processor and memory. The chassis gives every blade power, fans and network links, so the blades skip those parts. One chassis 10 units high can hold 16 blades.
Rack servers are also loud. Small fans spin fast to push air from front to back through a thin case. One running in an office sounds like a hair dryer that never stops. That noise is fine in a hall of machines and a real problem next to a desk.
Blades bring a trade. They save space and cables, but every blade depends on the chassis. Its power and fans are usually doubled to cover that. Blades from one maker also only fit that maker's chassis, so the first purchase decides the next ten.
People often buy a rack server for a home or small office because it looks serious. With no rack, it sits on a shelf where it does not fit. The noise drives people out of the room. For one or two servers outside a server room, a tower is the better buy.
The three server shapes side by side
| Shape | Stands in | Noise | Best for |
|---|---|---|---|
| Tower server | The floor or a desk | Quiet | A small office with one or two servers |
| Rack server | A rack, on rails | Loud | A server room or a data center |
| Blade server | A shared chassis in a rack | Loud | Many servers packed into little space |
Which shape to pick
- 1
Pick a tower
When one or two servers sit in an office or a home, with no rack and people nearby.
- 2
Pick rack servers
When you have a rack, or rent space in a data center, and want any maker's gear to fit.
- 3
Pick blades
When you need dozens of servers in a few racks and will buy them all from one maker.
Worked example
An architect's office picks a server
An office of 8 architects needs one server for drawings. A used rack server costs less, but there is no rack and the only space is beside the desks.
They buy a tower server instead. It sits in a cupboard, makes less noise than the printer, and has room for four more disks later.
The words for this lesson3
Check yourself
Which server shape suits a small office with no server room?
Finished this lesson?
Marking it complete also marks its 3 glossary entries learned, which updates your roadmap and your saved page. 0 are already marked.