Server Racks and Rack Units
Level 2 · Shapes and racks
Why racks are 19 inches wide and counted in units of 1.75 inches. How to read 1U, 2U and 42U, and plan what fits in one rack.
Course contentsLesson 4 of 8
Level 1 · What a server is
Level 2 · Shapes and racks
Level 3 · Parts that keep it running
Level 4 · Remote control and where servers live
After this lesson you can
- Read a height written as 1U, 2U or 42U
- Plan what fits in one rack
- Say why a rack keeps air moving one way
10 mincovers 2 glossary entries
Worth reading first: Rack vs Blade vs Tower
How rack sizes are counted
A server rack is a tall metal frame that holds servers and network gear in a stack. The usual rack is 19 inches wide inside, so gear from any maker fits. Its height is counted in rack units. One unit, written 1U, is 1.75 inches, or 44.45 millimetres. A full rack is often 42U high.
The units make planning a sum. A 1U server takes one slot, a 2U server takes two and a 4U server takes four. So a 42U rack can hold 42 servers at 1U each, or 21 at 2U. In practice some units go to network gear, power strips and spare room.
The width is fixed, but the depth is not. Most racks are 60 to 120 centimetres deep, and long servers need a deep rack. Measure the gear before you buy the frame.
Air moves one way through a rack. Cool air goes in at the front of every server, and hot air comes out of the back. In a big hall, racks stand in rows, all facing the same way. That makes cold aisles at the front and hot aisles at the back.
Heavy gear goes at the bottom. A battery box for power can weigh as much as an adult, and a rack loaded from the top can tip over. Light network gear often sits at the top, near the cables that come in from above.
The space a rack takes is also how it is priced. A data center may rent out a whole rack, half a rack, or a few units in a shared one. Power is counted too, because a rack full of servers can draw as much as several homes.
A common mistake is to fill every unit. Servers packed with no gap can block cables and trap heat, and there is no room for the next one. Leave a few units free, and fill empty slots with blank panels so hot air cannot loop back to the front.
Worked example
Jack plans a half rack
Jack rents a half rack of 21U. He needs a 1U network switch, four 2U servers and a 2U battery box.
That is 1 plus 8 plus 2, or 11U. He leaves the other 10U free, so the next two servers will fit without moving anything.
The words for this lesson2
Check yourself
How many 2U servers fit in a 42U rack with nothing else in it?
Finished this lesson?
Marking it complete also marks its 2 glossary entries learned, which updates your roadmap and your saved page. 0 are already marked.